Trunk Sill Protector
Installation is easy, please watch the quite video below:.
Installation guides for any products that are only made for the Refreshed Tesla Model 3 can be found here! Not sure if you have a 'refreshed' Model 3? If you have the factory ambient lighting and ventilated seats, then you have a Refresh!
Installation is easy, please watch the quite video below:.
Please refer to the video below, and take note of the following important points:.
Please refer to the video below. It's quite long, so please use the chapter markers to jump around.
Please refer to the video below:.
Please refer to the short video below.
Please refer to the short video below:.
Please take a moment to watch the video below, it includes important tips and tricks for achieving a prefect installation!.
So easy to install! Just stick the center cap on each hub cover, then push into each wheel to install. When applying the center caps, please apply firm pressure for 20 seconds (the 3M adhesive is pressure activated), and avoid driving in wet or cold
Please refer to the video below and use the chapter markers to jump to the section you need.