Xpel Armor for Tailgate InteriorUpdated 25 days ago

Please refer to the video below, and as always, try to install the Armor when the weather is warm and sunny ☀️

• Clean the area with isopropyl alcohol, soap, or water [02:02].
• Peel back the left-hand side, being careful at the cuts and corners [03:31].
• Fold the paper back and align the edge [03:44].
• Use a squeegee to lock it in place [04:27].
• Roll back all of the paper, releasing the ribs [04:38].
• Adjust if needed, ensuring perfect alignment [05:46].
• Squeegee everything thoroughly, removing air bubbles [07:38].
• Peel off the ribs carefully [08:11].
• Center and align each rib, leaving a small gap [08:24].
• Squeegee each rib, blending the ends [09:15].
• Repeat for the right-hand side, aligning with the center line [11:51].
• Ensure all edges are smooth and there are no trapped air bubbles [18:28].