Abstract Ocean Help Center logo
Abstract Ocean Help Center logo

All articles

Xpel Armor for Lower Door PanelsUpdated a month ago

Please watch the quick video below:

Here's an AI-generated summary guide:

  1. Gather Materials:

    • Xpel Armor protection kit for lower door panels
    • Isopropyl alcohol (not included)
    • Squeegee
    • Optional: Kneeling pad (if your knees have seen better days)
  2. Prepare the Area:

    • Clean the door panels with isopropyl alcohol to remove any trim enhancer or other residue.
    • If installing in cold weather, consider warming up the Xpel Armor slightly with a hairdryer.
  3. Install on Front Doors:

    • Align: Identify the key alignment points on the Xpel Armor piece (top and bottom).
    • Position: Carefully position the Xpel Armor on the door panel, aligning it with the marked points.
    • Secure: Gently press the top edge of the Xpel Armor into place.
    • Smooth: Use the squeegee to smooth out any air bubbles or wrinkles, working from the center outwards.
    • Roll: Use the palm of your hand to gently roll the Xpel Armor over any curved edges to ensure a smooth, tight fit.
    • Repeat: Follow the same steps for the other front door.
  4. Install on Rear Doors:

    • Access: Open the rear doors to a 90-degree angle for easier access.
    • Clean: Clean the rear door panels with isopropyl alcohol.
    • Align: Identify the key alignment points on the Xpel Armor piece (top and bottom).
    • Position: Carefully position the Xpel Armor on the door panel, aligning it with the marked points.
    • Secure: Gently press the top edge of the Xpel Armor into place.
    • Smooth: Use the squeegee to smooth out any air bubbles or wrinkles, working from the center outwards.
    • Roll: Use the palm of your hand to gently roll the Xpel Armor over any curved edges to ensure a smooth, tight fit.
    • Repeat: Follow the same steps for the other rear door.
  5. Final Checks:

    • Inspect the installed Xpel Armor for any remaining air bubbles or wrinkles. If found, gently peel back the affected area and re-smooth with the squeegee.

Additional Tips:

  • If installing in cold weather, consider warming up the Xpel Armor slightly with a hairdryer.
  • Use a kneeling pad for added comfort during installation.
  • Take your time and work carefully to ensure a professional-looking installation.


Was this article helpful?
Yes
No