Ultra-Premium Screen ProtectorsUpdated 3 months ago

Please refer to the video below. It's a long one, but use the chapter markers to jump to the section you need. There's tips on how to remove bubbles and dust towards the end with the rear protect install.

Bellow follows an AI-generated step-by-step instructions. 

Step 1: Prepare the Installation Area

1. Find a well-lit area: Park your Cybertruck in a well-lit area to ensure good visibility.
2. Turn off the air conditioning: Minimize air movement to prevent dust particles from settling on the screen.
3. Turn on "Screen Clean Mode": Go to Settings > Display and turn on "Screen Clean Mode" to illuminate the screen.

Step 2: Clean the Screen

1. Use the wet wipe: Thoroughly wipe down the entire screen with the included wet wipe to remove any dirt, grime, or fingerprints.
2. Use the dry wipe: Wipe down the screen again with the included lint-free cloth to remove any remaining moisture.
3. Use the dust removers: Gently wave the dust removers over the screen to remove any lingering dust particles.

Step 3: Install the Front Screen Protector

1. Remove the screen protector from the packaging: Carefully remove the front screen protector from its packaging.
2. Align the screen protector: Align the screen protector with the edges of the screen, ensuring it's properly positioned.
3. Peel off the backing: Slowly peel off the backing from the screen protector.
4. Apply the screen protector: Gently lower the screen protector onto the screen.
5. Remove any air bubbles: Use gentle pressure to smooth out any air bubbles from the center to the edges.
6. Remove the protective film: Carefully peel off the protective film from the top of the screen protector.

Step 4: Install the Rear Screen Protector

1. Clean the rear screen: Repeat the cleaning steps from Step 2 for the rear screen.
2. Remove the screen protector from the packaging: Carefully remove the rear screen protector from its packaging.
3. Align the screen protector: Align the screen protector with the edges of the rear screen.
4. Peel off the backing: Slowly peel off the backing from the screen protector.
5. Apply the screen protector: Gently lower the screen protector onto the rear screen.
6. Remove any air bubbles: Use gentle pressure to smooth out any air bubbles from the center to the edges.
7. Remove the protective film: Carefully peel off the protective film from the top of the screen protector.

Step 5: Final Checks

1. Check for air bubbles: Inspect the screen protectors for any remaining air bubbles. If any are present, gently peel back the affected area and re-apply.
2. Check for dust particles: Inspect the screen protectors for any trapped dust particles. Use the dust removers to remove any remaining particles.
3. Test screen responsiveness: Touch the screen to ensure it remains responsive after installation.
4. Check for phantom touches: If you experience any phantom touches, perform a soft reboot of your Cybertruck by pressing and holding the scroll wheels and the steering wheel until the Tesla logo appears.

Important Notes:

• This tutorial is based on the provided video and metadata.
• Always refer to the manufacturer's instructions for the most accurate and up-to-date installation guidelines.
• If you encounter any difficulties, contact Abstract Ocean customer support for assistance.