Superhydrophobic Camera Cover for CybertruckUpdated a day ago

Please review the FAQ here, and watch the video below:

Step by Step instructions AI generated from the video are below:

1. Unboxing:

   • Remove the camera cover from the packaging.
   • Note the QR code on the back of the packaging, which links to this video.

2. Preparation:

   • Clean the area around the rear camera lens thoroughly.
   • Ensure the surface is free of any debris or contaminants.

3. Positioning:

   • Align the camera cover with the rear camera housing.
   • Use the arch of the camera housing as a guide for proper alignment.
   • Ensure the cover is positioned correctly and evenly.

4. Adhesion:

   • Apply firm pressure to the camera cover to activate the 3M gel adhesive.
   • Note that the adhesive is pressure-activated and heat-activated.
   • If installing in cold weather, consider using a hair dryer or heat gun on a low setting to warm the area before applying the cover.

5. Removal:

   • Use a heat gun to gently warm the adhesive.
   • Once the adhesive softens, carefully twist and rotate the cover to remove it.
   • Any remaining adhesive can be easily removed with your thumb.

6. Reinstallation:

   • Clean the area around the camera lens with an alcohol swab.
   • Reinstall the camera cover following the same steps as above.

Additional Tips:

• The camera cover is designed to last between 3 and 6 months, depending on driving conditions and environmental factors.
• Consider subscribing to a replacement service to save 20% on future purchases.
• For optimal performance, replace the cover more frequently in areas with high air pollution or heavy particulate matter.
• If you live in a clean environment with low air pollution, the cover may last closer to 6 months.