Rivian Frunk Logo VinylUpdated 10 months ago
Please refer to the video below.
Please note, the vinyl we use (3M 2080) has a very thin clear, protective layer. We try to keep it in place, but sometimes it'll come away when we're cutting the vinyl. If it's there, don't worry if you notice a thin layer coming away from the vinyl, it's meant to be removed once the vinyl is installed.
Also important, the surfaced MUST be completely clean before application. This type of plastic is prone to off-gassing for up to 6 months after leaving the factory, which results in an (invisible) greasy layer on the surface of the plastic. Please used the supplied wipes to clean the target logo thoroughly.