Abstract Ocean Help Center logo
Abstract Ocean Help Center logo

All articles

Installing the PYD & P3D EmblemsUpdated a year ago

Please watch the quick video below - remember to install when the temperature is fairly 'normal', i.e. 16-25c, 60-80f.

Application is easy, you can watch our quick video below.

  1. Decide on placement, and clean the target area with the included wipe. Allow to dry
  2. If you want to be 100% it's level, apply some painters tape as a guide, and check it's level with a spirit level, but bear in mind that the rear of any car is difficult to find a true level that's relative to the other body lines, so it's easier to just eyeball it.
  3. Carefully peel off the red protective film, ensuring the letters stay in the foam template.
  4. Carefully apply the emblem to your car. Using very light pressure at first to ensure you're happy with the position. Step back and double check.
  5. Complete the installation by applying firm, even pressure (use a wipe or soft towel), then remove the foam template
  6. Done! Protect from water and temperature extremes for 24hrs.

Was this article helpful?