Animated Center Console Light StripsUpdated 3 months ago

Please select the video you need below. If you already have the animated dash LED light, then watch this video to see how to pair them so that the settings are synced.

Model 3/Y (2021-24, 2nd Generation Center Console)

Model 3 Refreshed (2024-, 3rd Generation Center Console) 

Bellow follows an AI-generated step-by-step instructions for the Refreshed Model 3 (aka Highland)

Step 1: Prepare the Installation Area

1. Remove the center console tray: Gently lift the tray out of the center console.
2. Unplug any existing accessories: Disconnect any USB cables or other devices connected to the center console ports.

Step 2: Install the Light Strips

1. Start on the driver's side: Begin at the end of the center console closest to the driver's seat.
2. Insert the light strip: Carefully insert the light strip into the gap between the carpet-like material and the pleather of the center console. Use the trim tool to gently pry open the gap if needed.
3. Route the light strip: Continue inserting the light strip along the length of the center console, ensuring it is flush with the surrounding trim.
4. Repeat on the passenger side: Follow the same steps to install the second light strip on the passenger side of the center console.

Step 3: Connect the Components

1. Connect the occupancy sensor: Place the occupancy sensor in the bottom of the center console.
2. Connect the light strips: Connect the light strips to the Bluetooth controller.
3. Connect the controller to the power source: Plug the USB-A to C adapter into the center console port. Then, plug the Bluetooth controller into the adapter.

Step 4: Customize the Lighting Effects

1. Use the Bluetooth controller: Cycle through the built-in lighting effects using the button on the controller.
2. Download the app: Scan the QR code on the controller or visit the Abstract Ocean help page to download the app for more advanced customization options.

Step 5: Tidy Up and Reassemble

1. Neaten the wires: Tuck any excess wires neatly into the center console.
2. Reinstall the center console tray: Place the tray back into the center console.
3. Optional: Install the retractable USB-C and Lightning cable, silicone liner, and center console tray liner.

Additional Tips:

• The occupancy sensor automatically turns off the lights when no one is in the car.
• The light strips are adjustable in brightness and color.
• The app allows for advanced customization, including creating custom color palettes and selecting from a wide range of lighting effects.
• If you encounter any difficulties during installation, refer to the Abstract Ocean help page or contact their customer support.