Xpel Armor for TruckbedUpdated 14 days ago

Please watch the videos below. The first shows the Edge sections. If you ordered the full truck bed kit, we recommend starting with the edges:

The second shows the main truck bed. Please do watch the first few minutes of each section (the lift-up panel and the main deck), use the Chapters to skip around.

• Clean the surface of the truck bed edge with isoprop alcohol [02:08].
• Peel back a couple of feet of the Xpel piece, and position it in the top corner [03:07].
• Work your way down, positioning the Xpel piece as you go [03:28].
• Peel and stick the Xpel, making sure to position it correctly [04:37].
• Avoid the material sticking to itself [04:07].
• Once you're happy with the position, you're done [05:22].

Additional tips:

• It's recommended to install the Xpel in sunshine and a decent temperature, ideally between 55 and 75 degrees Fahrenheit [01:34].
• If it's cooler, install it in the sunshine; if it's warmer, install it in the shade [02:44].
• To clean the Xpel armor, you can simply jet wash it down [05:33].